domingo, 2 de octubre de 2016

Cacteristicas del aceite para la refrigeración // Characteristics of oil for cooling

Propiedades de los aceites lubricantes
Aunque la mayoría de los aceites lubricantes permanecen en el compresor, una pequeña cantidad circulará hacia el resto del circuito frigorífico. El aceite lubricante debe ser capaz de resistir tanto una alta temperatura en la descarga del compresor y una baja temperatura en la válvula de expansión. Debe ser lo suficientemente soluble con el refrigerante mismo en orden de poder retornar al compresor, de manera que con el tiempo, este no se quede sin su aceite lubricante,lo cual podría generar una falla mecánica. Las propiedades se analizan a continuación.
Las propiedades de un buen aceite lubricante son:
Bajo contenido de cera. La separación de la cera del aceite del refrigerante puede llegar a crear una obstrucción en la válvula de expansión termostática o controles de orificio.
Buena estabilidad térmica. No debería formar depósitos de carbón en el compresor, en lugares tales como las válvulas de descarga del compresor.
Buena estabilidad química: debería tener una muy pequeña o ninguna reacción química con el refrigerante o con materiales propios del sistema frigorífico.
Bajo punto de fluidez: esto es la habilidad del aceite de permanecer en estado de fluidez a la temperatura más baja en el sistema.
Buena miscibilidad y solubilidad: esta propiedad asegura que el aceite retornará hacia el compresor, aunque una excesiva solubilidad puede resultar en el lavado del aceite lubricante de las partes móviles.
Bajo índice de viscocidad: esta es la habilidad del aceite lubricante de mantener una buena lubricidad a altas temperaturas y una buena fluidez a bajas temperaturas y proveer un buen film lubricante en todo tiempo.

Categorías

Básicamente existen seis tipos de categirías de aceites lubricantes para refrigeración:
Aceite Mineral (MO)
Aceite alquilbenceno (AB)
Aceite poliol éster (POE)

English
Properties of lubricating oils Although most lubricating oils remain in the compressor, a small amount will flow to the rest of the refrigeration circuit. The lubricating oil should be able to withstand both high temperature in the compressor discharge and a low temperature in the expansion valve. It must be sufficiently soluble with the refrigerant itself in order to return to the compressor, so that over time, this will not remain without its lubricating oil, which could lead to mechanical failure. The properties discussed below.

The properties of a good lubricating oil are:

* Low wax content. The separation of the refrigerant oil wax may create an obstruction in the expansion valve or orifice controls.

* Good thermal stability. should not form carbon deposits in the compressor, in places such as compressor discharge valves.

* Good chemical stability: should have very little or no chemical reaction with the refrigerant or with materials of the refrigeration system.

* Low pour point: this is the ability to remain oil flow state to the lowest temperature in the system.

* Good miscibility and solubility: this property ensures that the oil return to the compressor, although excessive solubility can result in washing the lubricant oil moving parts.

* Low viscosity index: This is the ability of the lubricating oil to maintain good lubricity at high temperatures and good flowability at low temperatures and provide a good lubricant film at all times.

Categories
Basically there are six types of categirías lubricating oil for cooling:

* Mineral Oil (MO)

* Oil alkylbenzene (AB)


* Oil polyol ester (POE)

No hay comentarios.:

Publicar un comentario